{"id":33245,"date":"2026-04-27T12:44:41","date_gmt":"2026-04-27T12:44:41","guid":{"rendered":"https:\/\/protasoftware.com\/technical-manuals\/settings-and-parameters\/protastructure-environment\/"},"modified":"2026-06-19T12:37:48","modified_gmt":"2026-06-19T12:37:48","slug":"protastructure-environment","status":"publish","type":"wiki","link":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/","title":{"rendered":"Protastructure Environment"},"content":{"rendered":"
\n
Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different computer.<\/span><\/span><\/span><\/div>\n

<\/span><\/p>\n

<\/span><\/p>\n

<\/span><\/p>\n

General<\/span><\/span><\/b>
<\/span><\/h1>\n

<\/span><\/p>\n

<\/span>General settings of the ProtaStructure can be controlled in the <\/span>General<\/span><\/b> page under <\/span>ProtaStructure Environment<\/span><\/b>.<\/span><\/span><\/div>\n
<\/span><\/span>
<\/span><\/div>\n
    \n
  1. \n
    General<\/span><\/span><\/u> :<\/span><\/span><\/b>
    <\/span><\/span><\/span><\/span><\/span><\/div>\n<\/li>\n

    <\/span><\/p>\n

      <\/span><\/p>\n
    1. <\/span>\n
      <\/span>Don\u2019t Check Model During Member Insertion :<\/span><\/span><\/b> To <\/span><\/span><\/span><\/span> <\/span>check overlapping between different member type (except column) during insertion. For example, beam to wall, wall to slab, beam to slab.<\/span>
      <\/span><\/span><\/span><\/div>\n<\/li>\n

      <\/span><\/p>\n

    2. <\/span>\n
      <\/span>Angle Step : <\/span><\/span><\/b> <\/span>While dragging two points during modelling, \u201cAngle Step\u201d will be effective when \u201cCtrl\u201d key is pressed. The rubber band line will snap to the multiples of the value entered in this field.<\/span>
      <\/span><\/span><\/div>\n<\/li>\n<\/ol>\n<\/ol>\n<\/div>\n
      \n
      \n
      \n
      \n
      \n
      \"Info\"For example, while dragging two points for inserting an axis, if \u201cAngle Step\u201d is defined as 30, then the rubber band line will snap to directions like 0, 30, 60, 90, 120 etc.<\/span><\/span><\/span><\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/blockquote>\n<\/blockquote>\n
      \n
      \n
      \n
      <\/div>\n<\/div>\n
      <\/div>\n<\/div>\n
        \n
          \n
        1. \n
          Length Step :<\/span><\/span><\/b> <\/span> While dragging two points<\/span><\/span> <\/span> during modelling <\/span><\/span><\/span> <\/span>, \u201cLength Step\u201d will be effective when \u201cCtrl\u201d key is pressed. The rubber band line\u2019s length will snap to the multiples of the value entered in this field.<\/span><\/span><\/span><\/span><\/div>\n<\/li>\n<\/ol>\n<\/ol>\n
          \n
          <\/div>\n<\/div>\n<\/div>\n
          \n
          \n
          \n
          \n
          \n
          \"Info\" <\/p>\n
          For example, while dragging two points for inserting an axis, if \u201cLength Step\u201d is defined as 1000 (with units set to millimeters), then the rubber band line\u2019s length will snap to values like 1000, 2000, 3000 etc.<\/span><\/span><\/div>\n

          <\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/blockquote>\n<\/blockquote>\n

          \n
            \n
              \n
            1. \n
              Member Section Eccentricity Step : <\/span><\/span><\/b> <\/span>Modify the member eccentricity values of a member using arrow keys on the keyboard when the member properties window is visible. <\/span><\/span><\/span> <\/span>The member eccentricity value along that direction is modified by the amount provided in this field.<\/span><\/span><\/span><\/div>\n<\/li>\n
            2. \n
              Enable Cell Merging In Report Tables (Slow)<\/b> : If this option is unchecked, all the merged-cells in all reports are dissolved into individual cells for the report performance. <\/span><\/span><\/span><\/div>\n<\/li>\n<\/ol>\n<\/ol>\n
                \n
              1. \n
                Language Settings<\/span><\/span><\/u> :<\/span><\/span><\/b><\/span><\/span> <\/span>
                <\/span><\/b><\/span><\/span><\/div>\n<\/li>\n

                <\/span><\/p>\n

                  <\/span><\/p>\n
                1. <\/span>\n
                  <\/span>Display Language :<\/span><\/b> To change the default language of the program. <\/span><\/span><\/span><\/span> <\/span>
                  <\/span><\/span><\/span><\/div>\n<\/li>\n

                  <\/span><\/p>\n

                2. <\/span>\n
                  <\/span>Report Language :<\/span><\/b> To change the default language of the generated report in ProtaStructure.<\/span><\/span><\/div>\n<\/li>\n<\/ol>\n<\/ol>\n
                    <\/span><\/p>\n
                  1. <\/span>\n
                    <\/span>Plan View Direction<\/span><\/span><\/u><\/b> (Project Based)<\/span><\/u> : <\/span><\/b>To set the view direction of plan view either from the top or the bottom.<\/span><\/span><\/div>\n<\/li>\n<\/ol>\n
                      \n
                    1. \n
                      Storey Assignment Method<\/u><\/b> <\/u>:  <\/span><\/span>This function is specifically for steel frame members, when they are created especially in 3D view & affects which storey it will be associated.  <\/span><\/span><\/span><\/span><\/span>The frame members\u2019 I and J end z-coordinates are checked against the storey z coordinates.<\/span><\/span><\/div>\n<\/li>\n
                        \n
                      1. \n
                        Assign the first storey with greater Z-coordinate<\/b> :  <\/span><\/span><\/span><\/span>The first storey whose z coordinate is greater than the member end coordinate is assigned to that end of the member. <\/span><\/span><\/span><\/span><\/span><\/div>\n<\/li>\n
                      2. \n
                        Assign the storey with the closest Z-coordinate :  <\/b><\/span><\/span><\/span><\/span>The frame is always assigned to the closest storey. <\/span><\/span><\/span><\/span><\/span><\/div>\n<\/li>\n<\/ol>\n<\/ol>\n
                          \n
                        1. \n
                          AutoSave<\/span><\/span><\/u> : <\/span><\/span><\/b> <\/span>
                          <\/span><\/span><\/span><\/div>\n<\/li>\n

                          <\/span><\/p>\n

                            <\/span><\/p>\n
                          1. <\/span>\n
                            <\/span>Automatic Save Interval<\/span><\/span><\/b> <\/span> : <\/span><\/span><\/b>To preset autosave interval time in minute.<\/span><\/span><\/span><\/span><\/div>\n<\/li>\n

                            <\/span><\/p>\n

                          2. <\/span>\n
                            <\/span>Prompt For Automatic Saving<\/span><\/span><\/b> <\/span> : <\/span><\/span><\/b>To allow program to prompt a project saving option\/reminder based on the autosave interval time.
                            <\/span><\/span>
                            <\/span><\/span><\/span><\/div>\n<\/li>\n
                          3. \n
                            Backup Structural Model<\/span><\/span><\/b> <\/span> : <\/span><\/span><\/b>To allow program to backup current project in hourly basis. This is done automatically in the background without user intervention.  <\/span><\/span><\/span>
                            <\/span><\/div>\n<\/li>\n

                            <\/span><\/p>\n

                              <\/span><\/p>\n
                            1. <\/span>\n
                              <\/span>Number of Backups to Save : – <\/span><\/b>To limit the number of backup file to be stored. If the number of backups <\/span><\/span><\/span> <\/span>has been reached, the oldest backup file will be overwritten and replaced by the latest backup file.<\/span><\/span><\/span>
                              <\/span><\/div>\n<\/li>\n
                            2. \n
                            3. \n
                              Return License on Shutdown : <\/span><\/span><\/b> <\/span>To allow auto return of license when shutting down ProtaStructure.<\/span><\/span><\/div>\n<\/li>\n<\/ol>\n<\/ol>\n
                                \n
                              1. Tooltip Preferences<\/span><\/span><\/u> : <\/span><\/span><\/b>
                                <\/span><\/span><\/li>\n

                                <\/span><\/p>\n

                                  <\/span><\/p>\n
                                1. <\/span>\n
                                  <\/span>Show Tool Tips :<\/span><\/span><\/b> <\/span> To allow to show tool tips when mouse hover on to a tool icon.
                                  <\/span><\/span><\/span><\/div>\n<\/li>\n

                                  <\/span><\/p>\n

                                2. <\/span>\n
                                  <\/span>Show Detailed Tool Tips :<\/span><\/span><\/b> <\/span> To allow to display the usage and tips of the pointed member. <\/span><\/span><\/div>\n<\/li>\n
                                3. \n
                                  <\/span>Tool tip Delay (sec) : <\/span><\/span><\/b> Delay can be set for tool tip to be appeared. <\/span><\/span><\/div>\n<\/li>\n<\/ol>\n<\/ol>\n
                                    \n
                                  1. \n
                                    Member Tooltip Window<\/span><\/span><\/u> : <\/span><\/span><\/b>To control the visibility of the content of the member tooltip window.<\/span>
                                    <\/span><\/span><\/div>\n<\/li>\n<\/ol>\n
                                    <\/div>\n
                                      \n
                                    1. \n
                                      Theme Selection<\/span><\/span><\/u> : <\/span><\/span><\/b> <\/span>To modify the theme of Graphical User Interface (GUI) of ProtaStructure.<\/span><\/span><\/div>\n<\/li>\n<\/ol>\n
                                        \n
                                      1. Export to ProtaSteel<\/span><\/span><\/u> : <\/span><\/span><\/b>To allow ProtaSteel to be launched without completing Building Analysis. This will import ProtaStructure model to ProtaSteel without valid analysis result.<\/span><\/span><\/li>\n<\/ol>\n
                                          \n
                                        1. Structure<\/span><\/span><\/span><\/span> Tree<\/span><\/span><\/span><\/span><\/u> : <\/span><\/b>
                                          <\/span><\/li>\n
                                            \n
                                          1. Display Section on Structure Tree : <\/span><\/b>Display section labels in structure tree.<\/span>
                                            <\/span><\/li>\n
                                          2. Display Materials on Structure Tree : <\/span><\/b>Display material labels in structure tree.<\/span>

                                            <\/span><\/li>\n<\/ol>\n
                                            <\/div>\n<\/ol>\n
                                            <\/p>\n

                                            Display Settings<\/span><\/span><\/b>
                                            <\/span><\/h1>\n

                                            <\/span><\/p>\n

                                            View and display settings of the ProtaStructure can be controlled in the  <\/span>Display Settings<\/span><\/b>  page under <\/span>ProtaStructure Environment<\/span><\/b>.<\/span><\/div>\n
                                            <\/div>\n

                                            <\/span><\/div>\n

                                            \n
                                              \n
                                            1. \n
                                              Colors<\/span><\/span><\/u><\/b> : <\/span><\/b>Options to modify color for background, selection, insertion point and line and so on. <\/span><\/span><\/span><\/span><\/span><\/div>\n<\/li>\n

                                              <\/span><\/p>\n

                                            2. <\/span>\n
                                              <\/span>Grid<\/span><\/u> : <\/span><\/b>Options to adjust the background grid.<\/span><\/span><\/span><\/span> <\/span>
                                              <\/span><\/span><\/div>\n<\/li>\n

                                              <\/span><\/p>\n

                                                <\/span><\/p>\n
                                              1. <\/span>\n
                                                <\/span>Grid Step :<\/span><\/b> To set the background grid to grid distance.<\/span><\/span><\/span><\/span> <\/span>
                                                <\/span><\/span><\/div>\n<\/li>\n

                                                <\/span><\/p>\n

                                              2. <\/span>\n
                                                <\/span>Major Lines at Every :<\/span><\/b> To set the interval of the major lines.<\/span><\/span><\/span><\/span> <\/span>
                                                <\/span><\/span><\/div>\n<\/li>\n

                                                <\/span><\/p>\n

                                              3. <\/span>\n
                                                <\/span>Major\/Minor Line Color :<\/span><\/b> To set the color of the major\/minor line.<\/span><\/span><\/span><\/span> <\/span>
                                                <\/span><\/span><\/div>\n<\/li>\n

                                                <\/span><\/p>\n

                                              4. <\/span>\n
                                                <\/span>Automatic Grid in New Views :<\/span><\/b> To display background grid when a new view is created\/opened.<\/span><\/span><\/span><\/span> <\/span>
                                                <\/span><\/span><\/div>\n<\/li>\n

                                                <\/span><\/ol>\n

                                                <\/span><\/p>\n

                                              5. <\/span>\n
                                                <\/span>Object Snap<\/span><\/u> : <\/span><\/b>To preset the object snap to specific object location.<\/span><\/span><\/span><\/span> <\/span>
                                                <\/span><\/span><\/div>\n<\/li>\n

                                                <\/span><\/p>\n

                                              6. <\/span>\n
                                                <\/span>Graphics Performance<\/span><\/u> : <\/span><\/span><\/b><\/span><\/span> <\/span>
                                                <\/span><\/span><\/div>\n<\/li>\n

                                                <\/span><\/p>\n

                                                  <\/span><\/p>\n
                                                1. Axis Indicators at View Edges : <\/span><\/span><\/b><\/span><\/span>To allow user to see the label of axis while zooming in or zooming out in the graphic user interface. (refer to the image below)<\/span>
                                                  <\/span><\/span><\/li>\n
                                                2. Display Member End Labels : <\/span><\/b>To display the start end "I" and the finish end "J" of the member (i.e. beam and frame only).<\/span><\/span><\/span><\/li>\n

                                                  <\/span><\/p>\n

                                                3. <\/span>\n
                                                  <\/span>Use SHX Fonts : <\/span><\/b>To <\/span><\/span><\/span><\/span> <\/span>customize the font type of ProtaStructure by checking this option. (e.g. Roman.psf, Simplex.psf or TXT.psf)<\/span><\/span><\/span><\/span><\/div>\n<\/li>\n

                                                  <\/span><\/p>\n

                                                4. <\/span>\n
                                                  <\/span>Line Type Scale : <\/span><\/span><\/b><\/span><\/span> <\/span>Different line types displayed on the graphical user interface can be scaled by this factor. Smaller values will result in finer (smaller) display of line types.<\/span><\/span><\/div>\n<\/li>\n
                                                5. \n
                                                  Display Sad Rod on Plan view <\/b>: To display sag rod on purlin in plan view. <\/span><\/span><\/div>\n<\/li>\n
                                                6. \n
                                                  Display Member End Cube in Linear View<\/b> :  To display a cube denotes end point of member<\/div>\n<\/li>\n<\/ol>\n<\/ol>\n<\/div>\n<\/div>\n
                                                                          <\/div>\n
                                                  \n
                                                    \n
                                                      <\/ol>\n<\/ol>\n<\/div>\n

                                                      Shortcut Keys Bindings
                                                      <\/h1>\n
                                                      Shortcut editor is located at Settings > ProtaStructure Environment > Shortcut Key Bindings<\/i><\/b> menu.<\/div>\n
                                                      <\/div>\n
                                                      Refer to following steps to change the key bindings: –<\/div>\n
                                                        \n
                                                      1. Double click on the Bindings cell next to any action. <\/li>\n
                                                      2. "Please enter shortcut…." prompt will be display on the screen and the UI will be in listening mode waiting for you to enter the key combinations using the keyboard. <\/li>\n
                                                      3. Enter the new key combination for the action. <\/li>\n<\/ol>\n
                                                        \n
                                                        \"Notes\"<\/p>\n
                                                        If the new key combination is used by another action, you must first change the binding for that action and make sure that the new key binding is not used by any action. You can then assign it to the action you want.<\/div>\n

                                                        <\/span><\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

                                                        Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different computer. General General settings…<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"template":"","meta":{"_whitepaper_youtube_videos":"[{\"url\":\"https:\/\/www.youtube.com\/playlist?list=PLK6L9NVEbzK-gxlZJ2JITmogt7N0HCDa7\",\"thumbnail\":\"https:\/\/i.ytimg.com\/vi\/83_LVxSVMqo\/hqdefault.jpg\",\"type\":\"playlist\",\"title\":\"02 - ProtaStructure ile Modelleme\"},{\"url\":\"https:\/\/www.youtube.com\/playlist?list=PLK6L9NVEbzK9Td-bC7_RMnwqjSDDCoR3j\",\"thumbnail\":\"https:\/\/i.ytimg.com\/vi\/HHWfDzJlfuE\/hqdefault.jpg\",\"type\":\"playlist\",\"title\":\"ProtaStructure Eu011fitim Videolaru0131\"}]","_whitepaper_youtube_url":"https:\/\/www.youtube.com\/playlist?list=PLK6L9NVEbzK9Td-bC7_RMnwqjSDDCoR3j","_whitepaper_youtube_thumbnail":"https:\/\/i.ytimg.com\/vi\/HHWfDzJlfuE\/hqdefault.jpg","footnotes":""},"categories":[180],"whitepaper_topic":[],"whitepaper_product":[],"whitepaper_type":[],"class_list":["post-33245","wiki","type-wiki","status-publish","hentry","category-settings-and-parameters"],"yoast_head":"\nProtastructure Environment - Prota Software<\/title>\n<meta name=\"description\" content=\"Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Prota Software\" \/>\n<meta property=\"og:description\" content=\"Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different\" \/>\n<meta property=\"og:url\" content=\"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/\" \/>\n<meta property=\"og:site_name\" content=\"Prota Software\" \/>\n<meta property=\"article:modified_time\" content=\"2026-06-19T12:37:48+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/protasoftware.com\/wp-content\/uploads\/2026\/04\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:title\" content=\"Prota Software\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/\",\"url\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/\",\"name\":\"Protastructure Environment - Prota Software\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/protasoftware.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/protasoftware.com\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png\",\"datePublished\":\"2026-04-27T12:44:41+00:00\",\"dateModified\":\"2026-06-19T12:37:48+00:00\",\"description\":\"Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/#primaryimage\",\"url\":\"https:\\\/\\\/protasoftware.com\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png\",\"contentUrl\":\"https:\\\/\\\/protasoftware.com\\\/wp-content\\\/uploads\\\/2026\\\/04\\\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png\",\"width\":1472,\"height\":1006},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/protastructure-environment\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/protasoftware.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Wiki\",\"item\":\"https:\\\/\\\/protasoftware.com\\\/wiki\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Protastructure Environment\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/protasoftware.com\\\/#website\",\"url\":\"https:\\\/\\\/protasoftware.com\\\/\",\"name\":\"Prota Software\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/protasoftware.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/protasoftware.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/protasoftware.com\\\/#organization\",\"name\":\"Prota Software\",\"url\":\"https:\\\/\\\/protasoftware.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/protasoftware.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/protasoftware.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/prota-logo.png\",\"contentUrl\":\"https:\\\/\\\/protasoftware.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/prota-logo.png\",\"width\":1200,\"height\":340,\"caption\":\"Prota Software\"},\"image\":{\"@id\":\"https:\\\/\\\/protasoftware.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Protastructure Environment - Prota Software","description":"Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/","og_locale":"en_US","og_type":"article","og_title":"Prota Software","og_description":"Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different","og_url":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/","og_site_name":"Prota Software","article_modified_time":"2026-06-19T12:37:48+00:00","og_image":[{"url":"https:\/\/protasoftware.com\/wp-content\/uploads\/2026\/04\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png","type":"","width":"","height":""}],"twitter_card":"summary_large_image","twitter_title":"Prota Software","twitter_misc":{"Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/","url":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/","name":"Protastructure Environment - Prota Software","isPartOf":{"@id":"https:\/\/protasoftware.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/#primaryimage"},"image":{"@id":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/#primaryimage"},"thumbnailUrl":"https:\/\/protasoftware.com\/wp-content\/uploads\/2026\/04\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png","datePublished":"2026-04-27T12:44:41+00:00","dateModified":"2026-06-19T12:37:48+00:00","description":"Item based settings can be modified in this form. These settings may be different for another ProtaStructure installation on a different","breadcrumb":{"@id":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/protasoftware.com\/wiki\/protastructure-environment\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/#primaryimage","url":"https:\/\/protasoftware.com\/wp-content\/uploads\/2026\/04\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png","contentUrl":"https:\/\/protasoftware.com\/wp-content\/uploads\/2026\/04\/prota-doc-3fe500ad4662b400c624c8fe03f57611.png","width":1472,"height":1006},{"@type":"BreadcrumbList","@id":"https:\/\/protasoftware.com\/wiki\/protastructure-environment\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/protasoftware.com\/"},{"@type":"ListItem","position":2,"name":"Wiki","item":"https:\/\/protasoftware.com\/wiki\/"},{"@type":"ListItem","position":3,"name":"Protastructure Environment"}]},{"@type":"WebSite","@id":"https:\/\/protasoftware.com\/#website","url":"https:\/\/protasoftware.com\/","name":"Prota Software","description":"","publisher":{"@id":"https:\/\/protasoftware.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/protasoftware.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/protasoftware.com\/#organization","name":"Prota Software","url":"https:\/\/protasoftware.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/protasoftware.com\/#\/schema\/logo\/image\/","url":"https:\/\/protasoftware.com\/wp-content\/uploads\/2026\/07\/prota-logo.png","contentUrl":"https:\/\/protasoftware.com\/wp-content\/uploads\/2026\/07\/prota-logo.png","width":1200,"height":340,"caption":"Prota Software"},"image":{"@id":"https:\/\/protasoftware.com\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/wiki\/33245","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/wiki"}],"about":[{"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/types\/wiki"}],"author":[{"embeddable":true,"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/users\/1"}],"version-history":[{"count":1,"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/wiki\/33245\/revisions"}],"predecessor-version":[{"id":36395,"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/wiki\/33245\/revisions\/36395"}],"wp:attachment":[{"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/media?parent=33245"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/categories?post=33245"},{"taxonomy":"whitepaper_topic","embeddable":true,"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/whitepaper_topic?post=33245"},{"taxonomy":"whitepaper_product","embeddable":true,"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/whitepaper_product?post=33245"},{"taxonomy":"whitepaper_type","embeddable":true,"href":"https:\/\/protasoftware.com\/wp-json\/wp\/v2\/whitepaper_type?post=33245"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}